Sonitron Maxi-T Truckmount Descaler 1kg

Maxi-T-50 is specially formulated to safely remove hard water deposits from Carpet Cleaning Machines. 

1. Rinse out carpet cleaning machine completely with fresh water to remove all detergent residues.

2. Dissolve 1Kg of Maxi-T-50 in 10L of hot water and return the solution to the hot water tank. 

3. Set the high pressure line to recirculate back into the stainless hot water tank. 

4. Run the set at idle so it takes about 20 minutes to reach unload temperature . Allow the set to unload normally. 

5. Stop the motor, drain the tanks, turn on the cold water supply, restart the machine and allow the pressure line to run to waste instead of recirculating. Continue to flush the machine and allow it to unload until samples taken from tanks high pressure line unload are perfectly clear.