Total floor maintainer that leaves behind a polymer film restoring gloss depth when buffed. Can be mopped manually or maintained with auto scrubber or spray buffers. It will build a wet look gloss when actuated by standard or ultra high speed (UHS) polishing machinery. Can be used on all types of floor and is especially effective on unsealed slate, quarry tiles, marble and rubber.
Features:
- Removes marks, soil and eliminates minor scratches without affecting the floor finish
- Adds life to floor finish, extending the stripping cycle and reducing maintenance
- Stops surfaces powdering and improves anti-slip characteristics.
How to Use:
Damp mop
- Dilute SHINER as directed. 1 to 80 parts water.
- Mop over surface and then buff with Oates Floormaster Tan buffing pad.
Auto scrubbing
- Fill the solution tank with required volume of water followed by recommended volume of SHINER. 1 to 100 parts water.
- Set the pad down on the floor and run the machine over the floor. For high sheen surface – use Oates Floormaster Tan or White pads.
- PLEASE NOTE: If floor looks streaky after scrubbing, it is improperly sealed or solution strength is too high.
Spray buffing
- Dilute SHINER as directed. Normal soil: 1 to 15 parts water. Heavy soil: 1 to 10 parts water.
- Spray using a trigger spray and buff the floor with Oates Floormaster Red spray buff pad.
- Spray buffing with SHINER will heal minor scratches and remove most marks.
pH: 8.00 – 9.00
