Research Slip Safe 5L

Non acid high traction maintenance cleaner. Minute particles of silica attach to the surface giving a safer, more slip resistant surface to most hard floors. Suitable for vinyl, timber, natural and synthetic stones, ceramics and terrazzo.

SLIP SAFE FEATURES:

Minimise the risk of slip / fall incidents on most sealed and unsealed hard floor surfaces.Maintain slip resistance and clean in one process.Does not contain acid making it safer to use.pH: 9.4 - 9.6.

SLIP SAFE DIRECTION SMethod of application:
Mop & bucket - Dilute 1 part Slipsafe to 80 parts water. Mop area in a figure of 8 pattern and let dry.
Auto scrubbing - Dilute 1 part Slipsafe to 100 parts water and scrub with white pad or soft nylon brush.
Note: Slipsafe may be removed by frequent buffing and should be applied on a regular basis.
High traffic areas, e.g. shopping centres, supermarkets - twice per week.
Low traffic areas, e.g. office buildings, commercial offices - once per week.

FIRST AID
Swallowed: Rinse mouth with water & give water to drink. Seek medical advice.
Skin: Wash contaminated area thoroughly with soap & water, remove contaminated clothing. If irritation persists seek medical advice.
Eyes: Immediately flush with copious amounts of water for 15 minutes; ensure the area under the eyelids is thoroughly cleaned with water. Seek medical advice.
Inhalation: Remove victim to open area. If breathing has ceased commence CPR, keep victim at rest until recovered & seek medical advice.Advice to Doctor: Treat symptomatically.

SAFETY
Goggles & rubber gloves must be worn when handling this product. Ensure adequate ventilation. Keep sealed when not in use, store at room temperature not below 2 degrees C.

Not considered hazardous according to the criteria of WorkSafe Australia